Juki LH-3568A-7 (with automatic thread trimmer), LH-3568A Semi-Dry Head, 2-Needle Lockstitch Machine

The LH-3500A Series is an advances 2 needle lockstitch machine available in heavy weight and light weight sub-classes.
The LH-3500A Series has made further progress. This is the cutting-edge model 2-needle sewing machine which comes with substantially enhanced mechanisms such as the direct-drive mechanism, semi-dry head, new thread tension control mechanism and improved oiling system.

The LH-3500A Series has made further progress. This is the cutting-edge model 2-needle sewing machine which comes with substantially enhanced mechanisms such as the direct-drive mechanism, semi-dry head, new thread tension control mechanism and improved oiling system.

Adoption of the direct-drive mechanism enhances energy conservation and workability, and increases the needle’s material penetrating force

A semi-dry head is now installed in all of the models of the LH-3500A SeriesONLY JUKI

All models of the LH-3500A Series are provided with a semi-dry head to eliminate staining with oil from the frame (the needle bar part).

The feed method can be easily changed over

The location of the oil tank has been changed to the inside of the sewing machine through our re-investigation of the lubricating method. As a result, space is secured under the bed surface to facilitate changeover of the feed method between the “needle feed” and “bottom feed” and changeover of the feed timing (re-placement of the timing belt).

Changeover between the needle feed and bottom feed

For the process of sewing light-weight materials or the like, puckering has to be prevented. In this case, the feed method can be changed over to the bottom feed through an easy adjustment and change of the gauge. In comparison with the needle feed, the bottom feed works to prevent puckering and enables sewing with a lower thread tension.

Production support function

The operation panels CP-18A and CP-180A are provided with a production support function

The production support function actually consists of three different functions (six different modes), which are the output control function, operation measuring function and bobbin counter function. Each with its own production support effect. An appropriate function (mode) can be selected as required.
The parameter setting can be done on the panel located on the top of the sewing machine, thereby helping reduce operator fatigue during setup changing.

Many different models are prepared according to the type of materials

From a wide variety of models, the best-suited model can be chosen according to your sewing items, ranging from light- to heavy-weight materials.

Material-friendly micro-lifter mechanism

The presser foot can be lifted by a minute amount by adjusting the eccentric pin located in the presser lifter lever section.
When sewing shaggy and elastic fabrics, the load applied to the material is reduced by slightly lifting the presser foot. Materials are handled more easily and are finished without sacrificing the inherent texture of the material.

Highly reliable thread-trimming mechanism

Our direct-acting thread trimmer mechanism, which spreads thread without fail, has been further improved. The thread trimmer trims the needle thread and bobbin thread without fail even when thick thread is used. In addition, the thread trimmer’s bobbin thread retaining force has been increased.

The best-suited thread tension is achieved according to the sewing specificationsUnique to JUKI

Two different types of thread tension controllers have been developed

The needle tension controller comes in two different mechanisms according to the type of sewing machine. For the A and F types, seam quality free from puckering and irregular stitches is promised. For the S and G types, the sewing range has been broadened to produce well-tensed seams even when thick thread is used.

Wire type and round-hole type needle bar thread guide

Two different kinds of needle bar thread guides (needle clamps), the wire type and round-hole type, have been developed according to the type of sewing machine. The wire-type needle bar thread guide has been adopted for the A and F types which require the sewing capability to sew light-weight materials and foundations without puckering or irregular stitches. The round-hole type needle bar thread guide has been adopted for the S and G types which sew materials requiring well-tensed seams. In addition, the G type is provided as standard with the presser foot with guide which is effective for the topstitching process.

Two selectable new-method oiling mechanismsUnique to JUKI

ECO-oli method (circulation type)

The oil dropped from the hook and its surrounding sections into the under-cover is filtered to remove dirt and dust and is then returned to the oil tank. This method saves the effort of oiling and reduces oil consumption.

Clean oil method

The oil dropped from the hook and its surrounding sections into the under-cover is not returned to the oil tank, but only clean oil is supplied to the hook at all times.

★The oiling method can be changed over as desired.

Specification

Model name	LH-3568A-S		LH-3568A-G
Application	Medium-weight		Jeans and heavy-weight
Organized split needle bar mechanism	Provided as standard
Hook	Vertical axis regular hook
Lubrication	Semi-dry / hook section: minute-quantity lubrication (tank system)
Max. sewing speed	3,000sti/min*
Distance from needle to machine arm	120mm (H) × 266mm (W) × 87mm (height of jaw part)
Feed system	Needle-feed
Max. stitch length	5mm
Needle bar stroke	33.4mm
Thread take-up	Slide type
Tensioner	Standard type
Thread winder	Built-in the machine head
Lift of the presser foot	7mm (by hand), 13mm (by knee)
Oiling method	Eco-oil method (circulation type), Clean oil method
Tank capacity	280cm³
Lubricating oil	JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
Needle	DP×5 (#14) #9~#16	DP×5 (#21) #16~#23
Outside dimensions of package (mm)	LH-3568A: 718mm (H) × 341mm (W) × 744mm (L) LH-3568A-7: 768mm (H) × 341mm (W) × 744mm (L)
Machine head weight (including the package)	LH-3568A: 48kg LH-3568A-7: 61kg (with AK: 63kg)

*”sti/min” stands for “Stitches per Minute.”

When you place orders

Gauge

LH-3568A-S

Guage			NEEDLE CLAMP ASM._LEFT	NEEDLE CLAMP ASM._RIGHT	NEEDLE CLAMP ASM._LEFT	NEEDLE CLAMP ASM._RIGHT
Figure
Needle width			P/N	P/N	P/N	P/N
Code	inch	mm	P/N	P/N	P/N	P/N
B	1/8	3.2	40035761	40035771	B1402528BA0A	B1402528BA0A
C	5/32	4.0	40035762	40035772	B1402528CA0A	B1402528CA0A
D	3/16	4.8	B1402528DALA	B1402528DARA	B1402528DALA	B1402528DARA
E	7/32	5.6	B1402528EAL	B1402528EAR	B1402528EAL	B1402528EAR
F	1/4	6.4	B1402528FALA	B1402528FARA	B1402528FALA	B1402528FARA
G	9/32	7.1	40035765	40035775	B1402528GAL	B1402528GAR
H	5/16	7.9	40035766	40035776	B1402528HALA	B1402528HARA
K	3/8	9.5	B1402528KALA	B1402528KARA	B1402528KALA	B1402528KARA
L	1/2	12.7	40035768	40035778	B1402528LAL	B1402528LAR
M	5/8	15.9	40035769	40035779	B1402528MAL	B1402528MAR
N	3/4	19.1	40035770	40035780	B1402528NAL	B1402528NAR
P	7/8	22.2	40071917	40071919	B1402528PAL	B1402528PAR
Q	1	25.4	40071921	40071923	B1402528QAL	B1402528QAR
Remarks			Option( Wire type) For DP5	Option(Wire type)For DP5	Hole type For DP5	Hole type For DP5

Guage			NEEDLE CLAMP ASM._LEFT	NEEDLE CLAMP ASM._RIGHT	NEEDLE CLAMP ASM._LEFT	NEEDLE CLAMP ASM._RIGHT
Figure
Needle width			P/N	P/N	P/N	P/N
Code	inch	mm	P/N	P/N	P/N	P/N
B	1/8	3.2	40035877	40035878	B1402526BA0A	B1402526BA0A
C	5/32	4.0	40026063	40026084	B1402526CA0A	B1402526CA0A
D	3/16	4.8	40026065	40026086	B1402526DALA	B1402526DARA
E	7/32	5.6	40026067	40026088	–	10228567
F	1/4	6.4	40026069	40026090	B1402526FALA	B1402526FARA
G	9/32	7.1	40026070	40026091	B1402526GALA	B1402526GARA
H	5/16	7.9	40026072	40026093	B1402526HALA	B1402526HARA
K	3/8	9.5	40026074	40026095	B1402526KALA	B1402526KARA
L	1/2	12.7	40026076	40026097	B1402526LALA	B1402526LARA
M	5/8	15.9	40026078	40026099	10228856	10228864
N	3/4	19.1	40026080	40026101	10228955	10228963
Q	1	25.4	40026082	40026103	10229151	10229169
Remarks			Option(Wire type) For DP17	Option(Wire type) For DP17	Option(Hole type) For DP17	Option(Hole type) For DP17

Guage			THROAT PLATE	FEED DOG	FEED DOG	PRESSER FOOT ASM._TIP DIVIDED
Figure
Needle width			P/N	P/N	P/N	P/N
Code	inch	mm	P/N	P/N	P/N	P/N
B	1/8	3.2	22625107	–	–	40035896
C	5/32	4.0	22625206	22630206	40025784	40035897
C	5/32	4.0	40072338	22630206	40025784	40035897
D	3/16	4.8	22625305	–	40025785	22640353
E	7/32	5.6	22625404	22630503	40025786	22640452
F	1/4	6.4	22625503	22630602	40025787	22640551
G	9/32	7.1	22625602	22630800	40025788	22640759
H	5/16	7.9	22625701	22630909	40025789	22640858
K	3/8	9.5	22625800	22631006	40025790	22640957
L	1/2	12.7	22626006	22631303	40025792	22641252
M	5/8	15.9	22626105	22631402	40025793	22641351
N	3/4	19.1	22626204	22631501	40025794	22641450
P	7/8	22.2	22626303	22631709	40025795	22641658
Q	1	25.4	22626402	22631808	40025796	22641757
Remarks			–	–	Option	–

Guage			SLIDE PLATE ASM._LEFT	SLIDE PLATE ASM._FRONT	SLIDE PLATE ASM._LEFT	SLIDE PLATE ASM._RIGHT
Figure
Needle width			P/N	P/N	P/N	P/N
Code	inch	mm	P/N	P/N	P/N	P/N
B	1/8	3.2	40051633	40042874	22601058	22600555
C	5/32	4.0	40051633	40042874	22601058	22600555
D	3/16	4.8	40051633	40042874	22601058	22600555
E	7/32	5.6	40051633	40042874	22601058	22600555
F	1/4	6.4	40051633	40042874	22601058	22600555
G	9/32	7.1	40051633	40042874	22601058	22600555
H	5/16	7.9	40051633	40042874	22601058	22600555
K	3/8	9.5	40051633	40042874	22601058	22600555
L	1/2	12.7	40045729	40042874	22601157	22600654
M	5/8	15.9	40045729	40042874	22601157	22600654
N	3/4	19.1	40045729	40042874	22601157	22600654
P	7/8	22.2	40045730	40042874	22601256	22600753
Q	1	25.4	40045730	40042874	22601256	22600753
Remarks			Option	–	–	–

LH-3568AS-7

Guage			NEEDLE CLAMP ASM._LEFT	NEEDLE CLAMP ASM._RIGHT	NEEDLE CLAMP ASM._LEFT	NEEDLE CLAMP ASM._RIGHT
Figure
Needle width			P/N	P/N	P/N	P/N
Code	inch	mm	P/N	P/N	P/N	P/N
B	1/8	3.2	40035761	40035771	B1402528BA0A	B1402528BA0A
C	5/32	4.0	40035762	40035772	B1402528CA0A	B1402528CA0A
D	3/16	4.8	B1402528DALA	B1402528DARA	B1402528DALA	B1402528DARA
E	7/32	5.6	B1402528EAL	B1402528EAR	B1402528EAL	B1402528EAR
F	1/4	6.4	B1402528FALA	B1402528FARA	B1402528FALA	B1402528FARA
G	9/32	7.1	40035765	40035775	B1402528GAL	B1402528GAR
H	5/16	7.9	40035766	40035776	B1402528HALA	B1402528HARA
K	3/8	9.5	–	–	B1402528KALA	B1402528KARA
L	1/2	12.7	40035768	40035778	B1402528LAL	B1402528LAR
M	5/8	15.9	40035769	40035779	B1402528MAL	B1402528MAR
N	3/4	19.1	40035770	40035780	B1402528NAL	B1402528NAR
P	7/8	22.2	40071917	40071919	B1402528PAL	B1402528PAR
Q	1	25.4	40071921	40071923	B1402528QAL	B1402528QAR
Remarks			Option, For DP5	Option, For DP5	Hole type, For DP5	Hole type, For DP5

Guage			NEEDLE CLAMP ASM._LEFT	NEEDLE CLAMP ASM._RIGHT	NEEDLE CLAMP ASM._LEFT	NEEDLE CLAMP ASM._RIGHT
Figure
Needle width			P/N	P/N	P/N	P/N
Code	inch	mm	P/N	P/N	P/N	P/N
B	1/8	3.2	40035877	40035878	B1402526BA0A	B1402526BA0A
C	5/32	4.0	40026063	40026084	B1402526CA0A	B1402526CA0A
D	3/16	4.8	40026065	40026086	B1402526DALA	B1402526DARA
E	7/32	5.6	40026067	40026088	–	10228567
F	1/4	6.4	40026069	40026090	B1402526FALA	B1402526FARA
G	9/32	7.1	40026070	40026091	B1402526GALA	B1402526GARA
H	5/16	7.9	40026072	40026093	B1402526HALA	B1402526HARA
K	3/8	9.5	40026074	40026095	B1402526KALA	B1402526KARA
L	1/2	12.7	40026076	40026097	B1402526LALA	B1402526LARA
M	5/8	15.9	40026078	40026099	10228856	10228864
N	3/4	19.1	40026080	40026101	10228955	10228963
Q	1	25.4	40026082	40026103	10229151	10229169
Remarks			Option(Wire type) For DP17	Option(Wire type) For DP17	Option(Hole type) For DP17	Option(Hole type) For DP17

Guage			THROAT PLATE	FEED DOG	FEED DOG	PRESSER FOOT ASM._TIP DIVIDED
Figure
Needle width			P/N	P/N	P/N	P/N
Code	inch	mm	P/N	P/N	P/N	P/N
B	1/8	3.2	40035881	40061270	40035890	40035896
C	5/32	4.0	40025485	40061271	40025817	40035897
D	3/16	4.8	40025490	40061272	40025818	22640353

E	7/32	5.6	40025491	40061273	40025819	22640452
F	1/4	6.4	40025492	40061274	40026715	22640551

G	9/32	7.1	40025493	40061275	40025820	22640759
H	5/16	7.9	40025494	40061276	40025821	22640858
K	3/8	9.5	40025495	40061277	40025822	22640957
L	1/2	12.7	40025498	40061278	40025824	22641252
M	5/8	15.9	40025499	40061279	40025825	22641351
N	3/4	19.1	40025500	40061280	40025826	22641450
P	7/8	22.2	40025502	40061281	40025827	22641658
Q	1	25.4	40025503	40061282	40025828	22641757
Remarks			–	–	Option	–

Guage			SLIDE PLATE ASM._LEFT	SLIDE PLATE ASM._FRONT	SLIDE PLATE ASM._LEFT	SLIDE PLATE ASM._RIGHT
Figure
Needle width			P/N	P/N	P/N	P/N
Code	inch	mm	P/N	P/N	P/N	P/N
B	1/8	3.2	40051633	40042880	40025247	40025235
C	5/32	4.0	40051633	40042880	40025247	40025235
D	3/16	4.8	40051633	40042880	40025247	40025235
E	7/32	5.6	40051633	40042880	40025247	40025235
F	1/4	6.4	40051633	40042880	40025247	40025235
G	9/32	7.1	40051633	40042880	40025247	40025235
H	5/16	7.9	40051633	40042880	40025247	40025235
K	3/8	9.5	40051633	40042880	40025247	40025235
L	1/2	12.7	40045729	40042880	40025248	40025236
M	5/8	15.9	40045729	40042880	40025248	40025236
N	3/4	19.1	40045729	40042880	40025248	40025236
P	7/8	22.2	40045730	40042880	40025249	40025239
Q	1	25.4	40045730	40042880	40025249	40025239
Remarks			Option	–	–	–

LH-3568A-G

Guage			NEEDLE CLAMP ASM._LEFT	NEEDLE CLAMP ASM._RIGHT	NEEDLE CLAMP ASM._LEFT	NEEDLE CLAMP ASM._RIGHT
Figure
Needle width			P/N	P/N	P/N	P/N
Code	inch	mm	P/N	P/N	P/N	P/N
B	1/8	3.2	40035761	40035771	B1402528BA0A	B1402528BA0A
C	5/32	4.0	40035762	40035772	B1402528CA0A	B1402528CA0A
D	3/16	4.8	B1402528DALA	B1402528DARA	B1402528DALA	B1402528DARA
E	7/32	5.6	B1402528EAL	B1402528EAR	B1402528EAL	B1402528EAR
F	1/4	6.4	B1402528FALA	B1402528FARA	B1402528FALA	B1402528FARA
G	9/32	7.1	40035765	40035775	B1402528GAL	B1402528GAR
H	5/16	7.9	40035766	40035776	B1402528HALA	B1402528HARA
K	3/8	9.5	B1402528KALA	B1402528KARA	B1402528KALA	B1402528KARA
L	1/2	12.7	40035768	40035778	B1402528LAL	B1402528LAR
M	5/8	15.9	40035769	40035779	B1402528MAL	B1402528MAR
N	3/4	19.1	40035770	40035780	B1402528NAL	B1402528NAR
P	7/8	22.2	40071917	40071919	B1402528PAL	B1402528PAR
Q	1	25.4	40071921	40071923	B1402528QAL	B1402528QAR
Remarks			Option(Wire type) For DP5	Option(Wire type) For DP5	Hole type, For DP5	Hole type, For DP5

Guage			NEEDLE CLAMP ASM._LEFT	NEEDLE CLAMP ASM._RIGHT	NEEDLE CLAMP ASM._LEFT	NEEDLE CLAMP ASM._RIGHT
Figure
Needle width			P/N	P/N	P/N	P/N
Code	inch	mm	P/N	P/N	P/N	P/N
B	1/8	3.2	40035877	40035878	B1402526BA0A	B1402526BA0A
C	5/32	4.0	40026063	40026084	B1402526CA0A	B1402526CA0A
D	3/16	4.8	40026065	40026086	B1402526DALA	B1402526DARA
E	7/32	5.6	40026067	40026088	–	10228567
F	1/4	6.4	40026069	40026090	B1402526FALA	B1402526FARA
G	9/32	7.1	40026070	40026091	B1402526GALA	B1402526GARA
H	5/16	7.9	40026072	40026093	B1402526HALA	B1402526HARA
K	3/8	9.5	40026074	40026095	B1402526KALA	B1402526KARA
L	1/2	12.7	40026076	40026097	B1402526LALA	B1402526LARA
M	5/8	15.9	40026078	40026099	10228856	10228864
N	3/4	19.1	40026080	40026101	10228955	10228963
P	7/8	22.2	–	–	–	–
Q	1	25.4	40026082	40026103	10229151	10229169
Remarks			Option(Wire type), For DP17	Option(Wire type) For DP17	Option(Hole type) For DP17	Option(Hole type) For DP17

Guage			FEED DOG	FEED DOG
Figure
Needle width			P/N	P/N
Code	inch	mm	P/N	P/N
C	5/32	4.0	B1613512C0H	–
D	3/16	4.8	B1613512D0H	40025801
E	7/32	5.6	B1613512E0H	40025802
F	1/4	6.4	B1613512F0H	40025803
G	9/32	7.1	B1613512G0H	40025804
H	5/16	7.9	B1613512H0H	40025805
K	3/8	9.5	B1613512K0H	40025806
L	1/2	12.7	B1613512L0H	40025808
M	5/8	15.9	B1613512M0H	40025809
N	3/4	19.1	B1613512N0H	40025810
P	7/8	22.2	B1613512P0H	40025811
Q	1	25.4	B1613512Q0H	40025812
Remarks			–	Option

Guage			SLIDE PLATE ASM._LEFT	SLIDE PLATE ASM._FRONT	SLIDE PLATE ASM._LEFT	SLIDE PLATE ASM._RIGHT
Figure
Needle width			P/N	P/N	P/N	P/N
Code	inch	mm	P/N	P/N	P/N	P/N
B	1/8	3.2	40051633	40042874	22601058	22600555
C	5/32	4.0	40051633	40042874	22601058	22600555
D	3/16	4.8	40051633	40042874	22601058	22600555
E	7/32	5.6	40051633	40042874	22601058	22600555
F	1/4	6.4	40051633	40042874	22601058	22600555
G	9/32	7.1	40051633	40042874	22601058	22600555
H	5/16	7.9	40051633	40042874	22601058	22600555
K	3/8	9.5	40051633	40042874	22601058	22600555
L	1/2	12.7	40045729	40042874	22601157	22600654
M	5/8	15.9	40045729	40042874	22601157	22600654
N	3/4	19.1	40045729	40042874	22601157	22600654
P	7/8	22.2	40045730	40042874	22601256	22600753
Q	1	25.4	40045730	40042874	22601256	22600753
Remarks			Option	–	–	–

Guage			PRESSER FOOT ASM._TIP DIVIDED	THROAT PLATE
Figure
Needle width			P/N	P/N
Code	inch	mm	P/N	P/N
B	1/8	3.2	40035896
C	5/32	4.0	40071909	40072338
D	3/16	4.8	22816557	–
E	7/32	5.6	22816656	–
F	1/4	6.4	22816755	–
G	9/32	7.1	22816854	–
H	5/16	7.9	22816953	–
K	3/8	9.5	22817050	–
L	1/2	12.7	22817159	–
M	5/8	15.9	40033945	–
N	3/4	19.1	40033947	–
P	7/8	22.2	40033949	–
Q	1	25.4	40033951	–

LH-3568AG-7

Guage			NEEDLE CLAMP ASM._LEFT	NEEDLE CLAMP ASM._RIGHT	NEEDLE CLAMP ASM._LEFT	NEEDLE CLAMP ASM._RIGHT
Figure
Needle width			P/N	P/N	P/N	P/N
Code	inch	mm	P/N	P/N	P/N	P/N
B	1/8	3.2	40035761	40035771	B1402528BA0A	B1402528BA0A
C	5/32	4.0	40035762	40035772	B1402528CA0A	B1402528CA0A
D	3/16	4.8	B1402528DALA	B1402528DARA	B1402528DALA	B1402528DARA
E	7/32	5.6	B1402528EAL	B1402528EAR	B1402528EAL	B1402528EAR
F	1/4	6.4	B1402528FALA	B1402528FARA	B1402528FALA	B1402528FARA
G	9/32	7.1	40035765	40035775	B1402528GAL	B1402528GAR
H	5/16	7.9	40035766	40035776	B1402528HALA	B1402528HARA
K	3/8	9.5	–	–	B1402528KALA	B1402528KARA
L	1/2	12.7	40035768	40035778	B1402528LAL	B1402528LAR
M	5/8	15.9	40035769	40035779	B1402528MAL	B1402528MAR
N	3/4	19.1	40035770	40035780	B1402528NAL	B1402528NAR
P	7/8	22.2	40071917	40071919	B1402528PAL	B1402528PAR
Q	1	25.4	40071921	40071923	B1402528QAL	B1402528QAR
Remarks			Option, For DP5	Option, For DP5	Hole type, For DP5	Hole type, For DP5

Guage			NEEDLE CLAMP ASM._LEFT	NEEDLE CLAMP ASM._RIGHT	NEEDLE CLAMP ASM._LEFT	NEEDLE CLAMP ASM._RIGHT
Figure
Needle width			P/N	P/N	P/N	P/N
Code	inch	mm	P/N	P/N	P/N	P/N
B	1/8	3.2	40035877	40035878	B1402526BA0A	B1402526BA0A
C	5/32	4.0	40026063	40026084	B1402526CA0A	B1402526CA0A
D	3/16	4.8	40026065	40026086	B1402526DALA	B1402526DARA
E	7/32	5.6	40026067	40026088	–	10228567
F	1/4	6.4	40026069	40026090	B1402526FALA	B1402526FARA
G	9/32	7.1	40026070	40026091	B1402526GALA	B1402526GARA
H	5/16	7.9	40026072	40026093	B1402526HALA	B1402526HARA
K	3/8	9.5	40026074	40026095	B1402526KALA	B1402526KARA
L	1/2	12.7	40026076	40026097	B1402526LALA	B1402526LARA
M	5/8	15.9	40026078	40026099	10228856	10228864
N	3/4	19.1	40026080	40026101	10228955	10228963
Q	1	25.4	40026082	40026103	10229151	10229169
Remarks			Option, For DP17(Wire type)	Option, For DP17(Wire type)	Option, For DP17(Hole type)	Option,For DP17(Hole type)

Guage			FEED DOG	FEED DOG
Figure
Needle width			P/N	P/N
Code	inch	mm	P/N	P/N
B	1/8	3.2	40053705	40053705
C	5/32	4.0	40071911	–
D	3/16	4.8	40035891	40025831
E	7/32	5.6	40050009	40025832
F	1/4	6.4	40035892	40025833
G	9/32	7.1	40050010	40025834
H	5/16	7.9	40050011	40025835
K	3/8	9.5	40035893	40025836
L	1/2	12.7	40035894	40025838
M	5/8	15.9	40071912	40025839
N	3/4	19.1	40035895	40025840
P	7/8	22.2	40071913	40025841
Q	1	25.4	40071914	40025842
Remarks			–	Option

Guage			SLIDE PLATE ASM._LEFT	SLIDE PLATE ASM._FRONT	SLIDE PLATE ASM._LEFT	SLIDE PLATE ASM._RIGHT
Figure
Needle width			P/N	P/N	P/N	P/N
Code	inch	mm	P/N	P/N	P/N	P/N
B	1/8	3.2	40051633	40042880	40025247	40025235
C	5/32	4.0	40051633	40042880	40025247	40025235
D	3/16	4.8	40051633	40042880	40025247	40025235
E	7/32	5.6	40051633	40042880	40025247	40025235
F	1/4	6.4	40051633	40042880	40025247	40025235
G	9/32	7.1	40051633	40042880	40025247	40025235
H	5/16	7.9	40051633	40042880	40025247	40025235
K	3/8	9.5	40051633	40042880	40025247	40025235
L	1/2	12.7	40045729	40042880	40025248	40025236
M	5/8	15.9	40045729	40042880	40025248	40025236
N	3/4	19.1	40045729	40042880	40025248	40025236
P	7/8	22.2	40045730	40042880	40025249	40025239
Q	1	25.4	40045730	40042880	40025249	40025239
Remarks			Option	–	–	–

Guage			PRESSER FOOT ASM._TIP DIVIDED	THROAT PLATE
Figure
Needle width			P/N	P/N
Code	inch	mm	P/N	P/N
B	1/8	3.2	40035896	40035881
C	5/32	4.0	40071909	40025485
D	3/16	4.8	22816557	40025490
E	7/32	5.6	22816756	40025491
F	1/4	6.4	22816755	40025492
G	9/32	7.1	22616854	40025493
H	5/16	7.9	22816953	40025494
K	3/8	9.5	22817050	40025495
L	1/2	12.7	22817159	40025498
M	5/8	15.9	40033945	40025499
N	3/4	19.1	40033947	40025500
P	7/8	22.2	40033949	40025502
Q	1	25.4	40033951	40025503
Remarks			–	–

LH-3578AG

Guage			FEED DOG	FEED DOG	NEEDLE CLAMP ASM.	PRESSER FOOT ASM._TIP DIVIDED	SWIVEL GUIDE PRESSER ASM.
Figure
Needle width			P/N	P/N	P/N	P/N	P/N
Code	inch	mm	P/N	P/N	P/N	P/N	P/N
A	3/32	2.4	–	–	10147551	–	–
B	1/8	3.2	B1613512B0H	–	10147650	40035896	–
C	5/32	4.0	B1613512C0H	–	10147759	40071909	–
D	3/16	4.8	B1613512D0H	40025801	10147758	22816557	40095293
E	7/32	5.6	B1613512E0H	40025802	10147757	22816656	–
F	1/4	6.4	B1613512F0H	40025803	10148054	22816755	40094776
G	9/32	7.1	B1613512G0H	40025804	10148153	22816854	–
H	5/16	7.9	B1613512H0H	40025805	10148252	22816953	–
K	3/8	9.5	B1613512K0H	40025806	10148351	22817050	–
W	7/16	11.1	40075311	40025807	10148450	40033941	–
L	1/2	12.7	B1613512L0H	40025808	10148559	22817159	–
M	5/8	15.9	B1613512M0H	40025809	10148658	40033945	–
N	3/4	19.1	B1613512N0H	40025810	10148757	40033947	–
P	7/8	22.2	B1613512P0H	40025811	10148856	40033949	–
Q	1	25.4	B1613512Q0H	40025812	10148955	40033951	–
R	1-1/8	28.6	B1613512R0H	40025813	10149052	40033953	–
S	1-1/4	31.8	B1613512S0H	40025814	10149151	40033955	–
T	1-3/8	34.9	B1613512T0H	40025815	10149250	40033957	–
U	1-1/2	38.1	B1613512U0H	40025816	10149359	40033959	–
Remarks				Option	Hole type

Guage			THROAT PLATE	THROAT PLATE	SLIDE PLATE ASM._LEFT	SLIDE PLATE ASM._RIGHT	SLIDE PLATE ASM._LEFT	SLIDE PLATE ASM._FRONT
Figure
Needle width			P/N	P/N	P/N	P/N	P/N	P/N
Code	inch	mm	P/N	P/N	P/N	P/N	P/N	P/N
A	3/32	2.4	–	–	22601058	22600555	40051633	40042874
B	1/8	3.2	22628002	–	22601058	22600555	40051633	40042874
C	5/32	4.0	22628101	–	22601058	22600555	40051633	40042874
D	3/16	4.8	22628200	40095288	22601058	22600555	40051633	40042874
E	7/32	5.6	22628309	–	22601058	22600555	40051633	40042874
F	1/4	6.4	22628408	40094772	22601058	22600555	40051633	40042874
G	9/32	7.1	22628507	–	22601058	22600555	40051633	40042874
H	5/16	7.9	22628606	–	22601058	22600555	40051633	40042874
K	3/8	9.5	–	–	22601058	22600555	40051633	40042874
W	7/16	11.1	–	–	22601058	22600555	40051633	40042874
L	1/2	12.7	–	–	22601157	22600654	40045729	40042874
M	5/8	15.9	–	–	22601157	22600654	40045729	40042874
N	3/4	19.1	–	–	22601157	22600654	40045729	40042874
P	7/8	22.2	–	–	22601256	22600753	40045730	40042874
Q	1	25.4	–	–	22601256	22600753	40045730	40042874
R	1-1/8	28.6	–	–	22601256	22600753	40045730	40042874
S	1-1/4	31.8	–	–	22601355	22600852	40045731	40042874
T	1-3/8	34.9	–	–	22601355	22600852	40045731	40042874
U	1-1/2	38.1	–	–	22601355	22600852	40045731	40042874
Remarks			binding				Option

LH-3578AG-7

Guage			THROAT PLATE	NEEDLE CLAMP ASM.	FEED DOG	FEED DOG	PRESSER FOOT ASM.	SWIVEL GUIDE PRESSER ASM.
Figure
Needle width			P/N	P/N	P/N	P/N	P/N	P/N
Code	inch	mm	P/N	P/N	P/N	P/N	P/N	P/N
A	3/32	2.4	–	10147551	–	–	–	–
B	1/8	3.2	40035881	10147650	40053705	40053705	40035896	–
C	5/32	4.0	40025484	10147759	40071911	–	40071909	–
D	3/16	4.8	40095289	10147858	40035891	40025831	22816557	40095293
E	7/32	5.6	40025491	10147957	40050009	40025832	22816656	–
F	1/4	6.4	40094773	10148054	40035892	40025833	22816755	40094776
G	9/32	7.1	40025493	10148153	40050010	40025834	22816854	–
H	5/16	7.9	40025494	10148252	40050011	40025835	22816953	–
K	3/8	9.5	40025495	10148351	40035893	40025836	22817050	–
W	7/16	11.1	40025496	10148450	–	40025837	40033941	–
L	1/2	12.7	40025498	10148559	40035894	40025838	22817159	–
M	5/8	15.9	40025499	10148658	40071912	40025839	40033945	–
N	3/4	19.1	40025500	10148757	40035895	40025840	40033947	–
P	7/8	22.2	40025502	10148856	40071913	40025841	40033949	–
Q	1	25.4	40025503	10148955	40071914	40025842	40033951	–
R	1-1/8	28.6	40025504	10149052	40071915	40025843	40033953	–
S	1-1/4	31.8	40025505	10149151	40051916	40025844	40033955	–
T	1-3/8	34.9	–	10149250	–	–	–	–
U	1-1/2	38.1	–	10149359	–	–	–	–
Remarks				Hole type		Option

Guage			SLIDE PLATE ASM._LEFT	SLIDE PLATE ASM._RIGHT	SLIDE PLATE ASM._LEFT	SLIDE PLATE ASM._FRONT
Figure
Needle width			P/N	P/N	P/N	P/N
Code	inch	mm	P/N	P/N	P/N	P/N
A	3/32	2.4	–	–	–	–
B	1/8	3.2	40025247	40025235	40051633	40042880
C	5/32	4.0	40025247	40025235	40051633	40042880
D	3/16	4.8	40025247	40025235	40051633	40042880
E	7/32	5.6	40025247	40025235	40051633	40042880
F	1/4	6.4	40025247	40025235	40051633	40042880
G	9/32	7.1	40025247	40025235	40051633	40042880
H	5/16	7.9	40025247	40025235	40051633	40042880
K	3/8	9.5	40025247	40025235	40051633	40042880
W	7/16	11.1	40025247	40025235	40051633	40042880
L	1/2	12.7	40025248	40025236	40045729	40042880
M	5/8	15.9	40025248	40025236	40045729	40042880
N	3/4	19.1	40025248	40025236	40045729	40042880
P	7/8	22.2	40025249	40025239	40045730	40042880
Q	1	25.4	40025249	40025239	40045730	40042880
R	1-1/8	28.6	40025249	40025239	40045730	40042880
S	1-1/4	31.8	40025250	40025240	40045731	40042880
T	1-3/8	34.9	–	–	–	–
U	1-1/2	38.1	–	–	–	–
Remarks

LH-3588AG

Guage			NEEDLE CLAMP ASM._LEFT	NEEDLE CLAMP ASM._FRONT	NEEDLE CLAMP ASM._LEFT	NEEDLE CLAMP ASM._FRONT
Figure
Needle width			P/N	P/N	P/N	P/N
Code	inch	mm	P/N	P/N	P/N	P/N
B	1/8	3.2	B1402526BA0A	B1402526BA0A	B1402528BA0A	B1402528BA0A
C	5/32	4.0	B1402526CA0A	B1402526CA0A	B1402528CA0A	B1402528CA0A
D	3/16	4.8	B1402526DALA	B1402526DARA	B1402528DALA	B1402528DARA
E	7/32	5.6	10228559	10228567	B1402528EAL	B1402528EAR
F	1/4	6.4	B1402526FALA	B1402526FARA	B1402528FALA	B1402528FARA
G	9/32	7.1	B1402526GALA	B1402526GARA	B1402528GAL	B1402528GAR
H	5/16	7.9	B1402526HALA	B1402526HARA	B1402528HALA	B1402528HARA
K	3/8	9.5	B1402526KALA	B1402526KARA	B1402528KALA	B1402528KARA
L	1/2	12.7	B1402526LALA	B1402526LARA	B1402528LAL	B1402528LAR
M	5/8	15.9	10228856	10228864	B1402528MAL	B1402528MAR
N	3/4	19.1	10228955	10228963	B1402528NAL	B1402528NAR
P	7/8	22.2	–	–	B1402528PAL	B1402528PAR
Q	1	25.4	10229151	10229169	B1402528QAL	B1402528QAR
Remarks			For DP1, Option	For DP17, Option	For DP5, Hole type	For DP5,Hole type

Guage			THROAT PLATE	SLIDE PLATE ASM._LEFT	SLIDE PLATE ASM._RIGHT	SLIDE PLATE ASM._LEFT	SLIDE PLATE ASM._FRONT
Figure
Needle width			P/N	P/N	P/N	P/N	P/N
Code	inch	mm	P/N	P/N	P/N	P/N	P/N
B	1/8	3.2	–	22601058	22600555	40051633	40042874
C	5/32	4.0	–	22601058	22600555	40051633	40042874
D	3/16	4.8	40095288	22601058	22600555	40051633	40042874
E	7/32	5.6	–	22601058	22600555	40051633	40042874
F	1/4	6.4	40094772	22601058	22600555	40051633	40042874
G	9/32	7.1	–	22601058	22600555	40051633	40042874
H	5/16	7.9	–	22601058	22600555	40051633	40042874
K	3/8	9.5	–	22601058	22600555	40051633	40042874
L	1/2	12.7	–	22601157	22600654	40045729	40042874
M	5/8	15.9	–	22601157	22600654	40045729	40042874
N	3/4	19.1	–	22601157	22600654	40045729	40042874
P	7/8	22.2	–	22601256	22600753	40045730	40042874
Q	1	25.4	–	22601256	22600753	40045730	40042874
Remarks						Option

Guage			FEED DOG	FEED DOG	PRESSER FOOT ASM._TIP DIVIDED	SWIVEL GUIDE PRESSER ASM.
Figure
Needle width			P/N	P/N	P/N	P/N
Code	inch	mm	P/N	P/N	P/N	P/N
B	1/8	3.2	–	–	40035896	–
C	5/32	4.0	B1613512C0H	–	40071909	–
D	3/16	4.8	B1613512D0H	40025801	22816557	40095293
E	7/32	5.6	B1613512E0H	40025802	22816556	–
F	1/4	6.4	B1613512F0H	40025803	22816555	40094776
G	9/32	7.1	B1613512G0H	40025804	22816554	–
H	5/16	7.9	B1613512H0H	40025805	22816553	–
K	3/8	9.5	B1613512K0H	40025806	22817050	–
L	1/2	12.7	B1613512L0H	40025808	22817159	–
M	5/8	15.9	B1613512M0H	40025809	40033945	–
N	3/4	19.1	B1613512N0H	40025810	40033947	–
P	7/8	22.2	B1613512P0H	40025811	40033949	–
Q	1	25.4	B1613512Q0H	40025812	40033951	–
Remarks				Option

LH-3588AG-7

Guage			FEED DOG	FEED DOG	THROAT PLATE	PRESSER FOOT ASM._TIP DIVIDED	SWIVEL GUIDE PRESSER ASM.
Figure
Needle width			P/N	P/N	P/N	P/N	P/N
Code	inch	mm	P/N	P/N	P/N	P/N	P/N
B	1/8	3.2	40053705	40053705	40035881	40035896	–
C	5/32	4.0	40071911	–	40025485	40071909	–
D	3/16	4.8	40035891	40025831	40095289	22816557	40095293
E	7/32	5.6	40050009	40025832	40025491	22816656	–
F	1/4	6.4	40035892	40025833	40094773	22816755	40094776
G	9/32	7.1	40050010	40025834	40025493	22816854	–
H	5/16	7.9	40050011	40025835	40025494	22816953	–
K	3/8	9.5	40035893	40025836	40025495	22817050	–
L	1/2	12.7	40035894	40025838	40025498	22817159	–
M	5/8	15.9	40071912	40025839	40025499	40033945	–
N	3/4	19.1	40035895	40025840	40025500	40033947	–
P	7/8	22.2	40071913	40025841	40025502	40033949	–
Q	1	25.4	40071914	40025842	40025503	40033951	–
Remarks				Option

Guage			NEEDLE CLAMP ASM._LEFT	NEEDLE CLAMP ASM._RIGHT	NEEDLE CLAMP ASM._LEFT	NEEDLE CLAMP ASM._RIGHT
Figure
Needle width			P/N	P/N	P/N	P/N
Code	inch	mm	P/N	P/N	P/N	P/N
B	1/8	3.2	B1402528BA0A	B1402528BA0A	B1402526BA0A	B1402526BA0A
C	5/32	4.0	B1402528CA0A	B1402528CA0A	B1402526CA0A	B1402526CA0A
D	3/16	4.8	B1402528DALA	B1402528DARA	B1402526DALA	B1402526DARA
E	7/32	5.6	B1402528EAL	B1402528EAR	10228559	10228567
F	1/4	6.4	B1402528FALA	B1402528FARA	B1402526FALA	B1402526FARA
G	9/32	7.1	B1402528GAL	B1402528GAR	B1402526GALA	B1402526GARA
H	5/16	7.9	B1402528HALA	B1402528HARA	B1402526HALA	B1402526HARA
K	3/8	9.5	B1402528KALA	B1402528KARA	B1402526KALA	B1402526KARA
L	1/2	12.7	B1402528LAL	B1402528LAR	B1402526LALA	B1402526LARA
M	5/8	15.9	B1402528MAL	B1402528MAR	10228856	10228864
N	3/4	19.1	B1402528NAL	B1402528NAR	10228955	10228963
P	7/8	22.2	B1402528PAL	B1402528PAR	–	–
Q	1	25.4	B1402528QAL	B1402528QAR	10229151	10229169
Remarks			For DP5, Hole type	For DP5, Hole type	For DP17, Option	For DP17, Option

Guage			SLIDE PLATE ASM._LEFT	SLIDE PLATE ASM._RIGHT	SLIDE PLATE ASM._LEFT	SLIDE PLATE ASM._FRONT
Figure
Needle width			P/N	P/N	P/N	P/N
Code	inch	mm	P/N	P/N	P/N	P/N
B	1/8	3.2	40025247	40025235	40051633	40042880
C	5/32	4.0	40025247	40025235	40051633	40042880
D	3/16	4.8	40025247	40025235	40051633	40042880
E	7/32	5.6	40025247	40025235	40051633	40042880
F	1/4	6.4	40025247	40025235	40051633	40042880
G	9/32	7.1	40025247	40025235	40051633	40042880
H	5/16	7.9	40025247	40025235	40051633	40042880
K	3/8	9.5	40025247	40025235	40051633	40042880
L	1/2	12.7	40025248	40025236	40045729	40042880
M	5/8	15.9	40025248	40025236	40045729	40042880
N	3/4	19.1	40025248	40025236	40045729	40042880
P	7/8	22.2	40025249	40025239	40045730	40042880
Q	1	25.4	40025249	40025239	40045730	40042880
Remarks					Option

Our Services