The machine is the leading double chainstitch machine for heavy-weight materials and achieves higher efficiency in operation and higher quality of finished products.
The looper tucks the thread without fail, thereby preventing stitch skipping
The placement of the feed mechanism has been charged to decrease the feed amount when the needle enters the material, thus preventing the needle from bending. The bobbin thread is clamped without fail, thereby producing consistent thread loops. The looper tucks the needle thread without fail, thereby finishing uniform seams.
The machine provides beautifully-finished seams even when heavy-weight material is used
Thanks to the thread guide located between the needle bar thread take-up and the intermediate tension release lever, the timing to tense the needle thread can be changed and the bobbin thread tension can be decreased. As a result, the machine is capable of beautiful finished stitches with a soft appearance even when heavy-weight material is used.
The feed mechanism smoothly feeds the material, thereby allowing the machine to finish seams with consistency
The number of teeth of the feed dog has been increased so that it can easily catch overlapping material. The shape of the presser foot has been modified to prevent single-sided contact with the overlapped part. The movable needle guard (rear) is provided with a vertical adjusting mechanism. These features contribute to smoother feed of heavy-weight materials, thereby preventing stitch skipping.
The feed mechanism smoothly feeds the material, thereby allowing the machine to finish seams with consistency
The number of teeth of the feed dog has been increased so that it can easily catch overlapping material. The shape of the presser foot has been modified to prevent single-sided contact with the overlapped part. The movable needle guard (rear) is provided with a vertical adjusting mechanism. These features contribute to smoother feed of heavy-weight materials, thereby preventing stitch skipping.
Specification
| Model name | MS-1261M | MS-1261 | ||
|---|---|---|---|---|
| Application | For medium- to heavy-weight materials | For extra heavy-weight materials for jeans | ||
| No. of needle | 3 | |||
| Max. sewing speed | 3,600sti/min (normal 3,000sti/min)* | |||
| Needle bar stroke | 33.2mm | |||
| Needle (at the time of delivery) | SCHMETZ UY128GAS (Nm120) Nm100~Nm140 ORGAN UY×128GAS-NY (#19) #16~#22 | SCHMETZ UY128GAS (Nm130) Nm100~Nm140 ORGAN UY×128GAS-NY (#21) #16~#22 | ||
| Needle gauge | 5.6mm (7/32″), 6.4mm (1/4″), 7.2mm (9/32″), 8.0mm (5/16″), 9.6mm (3/8″) | |||
| Stitch length | 1.4~4.2mm | |||
| Lift of the presser foot | 10mm | |||
| Thread take-up lever | Needle bar thread take-up lever | |||
| Circumference of tube at the needle entry | 190mm | |||
| Needle guard | Backward travelling needle guard | |||
| Stitch adjusting system | By push-button (with locking mechanism) | |||
| Lubrication | Semi-automatic lubrication | |||
| Lubricating oil | JUKI New Defrix Oil No.1 (equivalent to ISO VG7) | |||
*”sti/min” stands for “Stitches per Minute.”
When you place orders
Gauge
MS-1261
| Guage | GUAGE SET | THROAT PLATE | NEEDLE CLAMP ASM. | PRESSER FOOT ASM. | FEED DOGS (PAIR) | ||
|---|---|---|---|---|---|---|---|
| Figure | – |  |  |  |  | ||
| Needle width | P/N | P/N | P/N | P/N | P/N | ||
| Code | inch | mm | |||||
| E | 7/32 | 5.6 | 12954061 | 12954004 | 12956355 | 12957163 | 12965158 |
| F | 1/4 | 6.4 | 12953964 | 12953907 | 12956256 | 12957064 | 12965059 |
| G | 9/32 | 7.2 | 12954160 | 12954103 | 12956454 | 12957262 | 12965257 |
| H | 5/16 | 7.9 | 12954269 | 12954202 | 12956553 | 12957361 | 12965356 |
| K | 3/8 | 9.5 | 12954368 | 12954301 | 12956652 | 12957460 | 12965455 |
| Remarks | With finger guard | – | – | With finger guard | – | ||
| Guage | LOOPER_L | LOOPER_R | LOOPER_C | HOLDERS (PAIR)_M298 | HOLDERS (PAIR)_M299 | ||
|---|---|---|---|---|---|---|---|
| Figure |  |  |  |  | | ||
| Needle width | P/N | P/N | P/N | P/N | P/N | ||
| Code | inch | mm | |||||
| E | 7/32 | 5.6 | 12968558 | 12968855 | 12969150 | MAM2980AABA | MAM2990AABA |
| F | 1/4 | 6.4 | 12968558 | 12968855 | 12969150 | MAM2980BBBA | MAM2990BBBA |
| G | 9/32 | 7.2 | 12968558 | 12968855 | 12969150 | MAM2980CCBA | MAM2990CCBA |
| H | 5/16 | 7.9 | 12968657 | 12968954 | 12969150 | MAM2980DDBA | MAM2990DDBA |
| K | 3/8 | 9.5 | 12968657 | 12968954 | 12969150 | MAM2980EEBA | MAM2990EEBA |
| Remarks | – | – | – | Mark: H Heaby weight (OP) | Mark: XH For extra heavy weight materials (MS-1261 Standard) | ||
| Remarks | – | – | – | Holders are not included in the gauge set. | |||
| Guage | FEED DOG SPACER | |
|---|---|---|
| Needle width | P/N | Remarks |
| Thickness (mm) | ||
| 0.3 | 12976601 | Feed dog adjusting plate B |
| 0.8 | 12976700 | Feed dog adjusting plate C |
| 1.0 | 12976809 | Feed dog adjusting plate D |
MS-1261M
| Guage | GUAGE SET | THROAT PLATE | NEEDLE CLAMP ASM. | PRESSER FOOT ASM. | FEED DOGS (PAIR) | ||
|---|---|---|---|---|---|---|---|
| Figure | – |  | |  |  | ||
| Needle width | P/N | P/N | P/N | P/N | P/N | ||
| Code | inch | mm | |||||
| E | 7/32 | 5.6 | 12954665 | 12954608 | 12956355 | 12956165 | 12970059 |
| F | 1/4 | 6.4 | 12954566 | 12954509 | 12956256 | 12956066 | 12969952 |
| G | 9/32 | 7.2 | 12954764 | 12954707 | 12956454 | 12956769 | 12970158 |
| H | 5/16 | 7.9 | 12954863 | 12954806 | 12956553 | 12956868 | 12970257 |
| K | 3/8 | 9.5 | 12954962 | 12954905 | 12956652 | 12956967 | 12970356 |
| Remarks | With finger guard | – | – | With finger guard | – | ||
| Guage | LOOPER_L | LOOPER_R | LOOPER_C | HOLDERS (PAIR)_M297 | HOLDERS (PAIR)_M298 | ||
|---|---|---|---|---|---|---|---|
| Figure | | | | | | ||
| Needle width | P/N | P/N | P/N | P/N | P/N | ||
| Code | inch | mm | |||||
| E | 7/32 | 5.6 | 12968558 | 12968855 | 12969150 | MAM2970DDBA | MAM2980AABA |
| F | 1/4 | 6.4 | 12968558 | 12968855 | 12969150 | MAM2970EEBA | MAM2980BBBA |
| G | 9/32 | 7.2 | 12968558 | 12968855 | 12969150 | MAM2970FFBA | MAM2980CCBA |
| H | 5/16 | 7.9 | 12968657 | 12968954 | 12969150 | MAM2970GGBA | MAM2980DDBA |
| K | 3/8 | 9.5 | 12968657 | 12968954 | 12969150 | MAM2970HHBA | MAM2980EEBA |
| Remarks | – | – | – | Mark: MH Medium weight (MS-1261M Standard) | Mark: H Heaby weight (OP) | ||
| Remarks | – | – | – | Holders are not included in the gauge set. | |||
English